cylinder liner & liner sleeve | Catalogue Request
 |
 |
CYLINDER LINERS and sleeve manufactured by the "CENTRIFUGAL CAST PROCESS" is acknowledged to be the best method. It possesses the bearing metal qualities that cause skin healing after abrasion and a structure that is readily wetted by oil and retains an oil film. Corrosion resistance is further improved by adding Chromium in the metal. In the centrifugal casting process, the molten metal is poured into a metal mould or die which is revolving at a high speed.The centrifugal force causes the metal to - |
distribute itself evenly around the die. The resulting castings are of much finer grain and free from blow holes or porosity
A further important advantage is that the impurities, being lighter than the iron, are forced centrifugally to the bore surface |
|
